ARCHITECTURAL RAINSCREEN WALL SYSTEMS200 Gale Lane, Kennett Square, Pa. 19348 | P [800] 321-7816 | F [610] 444-9328 | metalwerksusa.com • As rainscreen systems rely on gravity to drain water, all skyward facing surfaces, copings, sloped conditions and all perimeters must be sealed • 100% recyclable with high percentage of post-consumer and industrial content, which may contribute to LEED credits DESIGN OPTIONS • Panels may be !at, curved, or custom 3D pro"les • Variable reveals: Horizontal 0.625” - 2” (15.88 mm - 50.8 mm); Vertical 0.25” - 2” (6.35 mm - 50.8 mm) • Unlimited color options for aluminum plate • Options for #4, #6, #8, and non-directional "nishes for stainless plate • Matching perforated and louvered panels • Projecting eyebrows with integrated framing can be included • Available shop-applied appliqués for accents • May also be used for so#ts, column, beam and pilaster cladding • Optional back-cuts on formed panel edges for a sharper bend and crisper appearance Arcwall is an economical drained and back-ventilated rainscreen system for both walls and so#ts manufactured from formed aluminum or stainless plate. The system combines excellent performance with a high design !exibility. Arcwall panels can be !at, curved, or formed into custom 3D pro"les and can be installed both horizontally and vertically. Horizontal reveals are also available in varying heights from 5/8” to 2”. The system is entirely dry-set with integrally formed interlocking longitudinal joints and simpli"ed backup guttering. This includes formed panels with welded corners and factory-mounted j-hook extrusions for male-female engagement. Arcwall may be installed over stud/sheathed walls, continuous masonry, concrete, or as the outer cladding in a wall assembly that incorporates continuous insulation and a suitable air and water barrier. DETAILS • Manufactured from solid aluminum or stainless plate with integral panel returns formed from a single piece of metal • Solid aluminum and stainless steel: high resistance to denting and puncturing, ideal for high-tra#c or abusive areas • Fully mitered and welded corners ground smooth for seamless appearance • 0.625” (15.88 mm) standard horizontal and vertical joint with variable options • Adjustable furring to address variable construction tolerances and ensuring vertical sealing to air and water barrier, minimizing shims • Non-Combustible: minimal smoke or fuel contribution • Avoids NFPA 285 complications by avoiding thermo-plastic cores • All panel systems are reinforced/stiffened to resist de!ection limits • Vertical gutters channel water from horizontal gutters draining moisture to the exterior • Panels install both horizontally and vertically • Concealed fastened using corrosion-resistant self-tapping screws • Aluminum: post-applied "nishing for long-term performance and uniform aesthetic Arcwall ™ Rainscreen Wall System200 Gale Lane, Kennett Square, Pa. 19348 | P [800] 321-7816 | F [610] 444-9328 | metalwerksusa.com VERTICAL JOINTHORIZONTAL JOINT METAL SUBSTRATE AND FINISH OPTIONS ALUMINUM 3003-H14 aluminum alloy-temper Thickness: 0.125” (3.18 mm) standard and 0.188” (4.78 mm) option Finishes: Kynar®, architectural TGIC Polyester powder coating, or anodized STAINLESS STEEL T304 or T316 Thickness: 14 gauge (0.078”) (1.98 mm) standard, 16 gauge (0.063”) (1.60 mm), 12 gauge (0.109”) (2.78 mm) options Finishes: #4, #6, #8, and non-directional satin in smooth or custom embossed patterns PANEL SIZES Widths: 12” (305 mm) to 65” (1,651 mm)* Lengths: 12” (305 mm) to 160” (4,064 mm)* Depth: 1.75” (44.45 mm) minimum * Maximum panel size depends upon plate material, gauge, "nish, and geometry PANEL WEIGHT RANGE (dependent upon gauge and geometry) Aluminum: 2.62 - 3.52 lbs./ft2 Stainless Steel: 4.64 - 5.913 lbs./ft% Ranges provided for clari"cation. Consult with Metalwërks for further options. ACCESSORIES Flashing: 0.040” (1.02 mm) thick to 0.063” (1.60 mm) aluminum Coping: Wall copings may be produced with the same material as the wall panel system Furring Channels: As required for proper mounting of panels Fasteners: Type 304 stainless steel or cadmium-plated as recommended Shims: High impact thermally-broken plastic shims to maintain co-planar surfaces WARRANTY Material & Workmanship: 1-year standard, with 2- or 5-year options Finish Integrity: 10-year standard and up to 20-year for coated aluminum Arcwall ™ Rainscreen Wall System SHARP CORNERSTANDARD CORNER200 Gale Lane, Kennett Square, Pa. 19348 | P [800] 321-7816 | F [610] 444-9328 | metalwerksusa.com DESIGN OPTIONS • Panels may be mixed and variable modules in ! at or 3D pro" les • Variable reveals: Horizontal 0.125” - 2” (3.18 mm - 50.8 mm); Vertical 0.25” - 6” (6.35 mm - 152.4 mm) • Panel end joints can be staggered to create running bond patterns • Unlimited color options for aluminum • Options for #4, #6, #8, and non-directional " nishes for stainless steel • Matching perforated and louvered panels • May also be used for column, beam and pilaster cladding • Integrated shop formed reveals Econowall is an economical drained and back-ventilated rainscreen cladding system. Econowall panels are dry-set with interlocking longitudinal joints and rigid " nished end conditions. For any project demanding complete design ! exibility, Econowall can accommodate artistic freedom with nearly unlimited " nishes, pro" les and size options at a competitive value. Econowall has " nished end cap conditions and custom modules not available with roll formed products at competitive costs. Econowall may be installed over continuous masonry, concrete, or as the outer cladding in a wall assembly that incorporates continuous insulation and a suitable air and water barrier. The system is also an excellent choice for open framing applications to clad un-conditioned spaces such as fascia, so# t, canopy or screen wall applications. Panels can be solid or perforated for so# t applications. DETAILS • Manufactured from pre-" nished aluminum, stainless, or zinc with integral panel returns formed from a single piece of metal • Fully mitered aluminum and stainless steel panels • 0.5” (12.7 mm) standard horizontal and vertical joint with variable options • Adjustable furring to address variable construction tolerances and ensuring vertical sealing to air and water barrier, minimizing shims • Non-Combustible: minimal smoke or fuel contribution • Avoids NFPA 285 complications by avoiding thermo-plastic cores • All panel systems are reinforced/stiff ened to resist de! ection limits • Panels install horizontally or vertically • Concealed fastened using corrosion-resistant self-tapping screws • As rainscreen systems rely on gravity to drain water, all skyward facing surfaces, copings, sloped conditions and all perimeters must be sealed • 100% recyclable with high percentage of post-consumer and industrial content, which may contribute to LEED credits Econowall ™ Rainscreen Wall System200 Gale Lane, Kennett Square, Pa. 19348 | P [800] 321-7816 | F [610] 444-9328 | metalwerksusa.com METAL SUBSTRATE AND FINISH OPTIONS ALUMINUM 3003-H14 aluminum alloy-temper Thickness: 0.08” (2.03 mm) standard, 0.05” (1.27 mm), 0.063” (1.60 mm), 0.09” (2.29 mm) Finishes: Kynar®, architectural TGIC polyester powder coating, or anodized STAINLESS STEEL T304 or T316 Thickness: 18 gauge (0.05”) (1.27 mm) standard and 16 gauge (0.063”) (1.60 mm) option Finishes: #4, #6, #8, and non-directional satin in smooth or custom embossed patterns ZINC Thickness: 0.059” (1.5 mm) standard and 0.047” (1.2 mm) option Finishes: Consult with Metalwërks for options Zinc is a natural metal which has speci" c properties that will limit its use. It must be adequately drained, ventilated and weeped when used in exterior applications to prevent excessive corrosion. Please consult Metalwërks for the appropriate uses for your project design. PANEL SIZES Widths: 6” ( 152.4 mm) to 36” (914.4 mm)* Lengths: 12” (305 mm) to 160” (4,064 mm)* Depth: 1.5” (38.1 mm) minimum * Maximum panel size depends upon material, gauge, " nish, and geometry PANEL WEIGHT RANGE (dependent upon gauge and geometry) Aluminum: 2.18 - 2.825 lbs./ft2 Stainless Steel: 2.994 - 3.477 lbs./ft2 Zinc: 3.58 lbs./ft 2 - Consult with MetalWërks Ranges provided for clari" cation. Consult with Metalwërks for further options. ACCESSORIES Flashing: As required at base or penetration conditions produced in the same material " nish as the panel system Coping: Wall copings may be produced with the same material as the wall panel system Furring Channels: As required for proper mounting of panels Fasteners: Type 304 stainless steel or cadmium-plated as recommended Shims: High impact thermally-broken plastic shims to maintain co-planar surfaces WARRANTY Material & Workmanship: 1-year standard, with 2- or 5-year options Finish Integrity: 10-year standard and up to 20-year for coated aluminum Econowall ™ Rainscreen Wall SystemNext >