< PreviousALL-METAL CONSTRUCTION When combined with our façade cladding products – Omniplate™, Arcwall™, and Ameriplate™ – the designer can use a singular finish for all metal elements, visually unifying the façade. For example, walls, canopies, and column cladding can be confidently color-matched with roof trellises, grilles, and screenwalls. All Metalwërks systems are made exclusively from solid metal – no plastics or composite materials are used. Metalwërks avoids all plastics because: • We do not want to contribute to the production and dissemination of petroleum-based plastic materials as they are noxious, toxic when burned, and often combustible • Plastics rely on the production of hydrocarbon-laden feedstock components • Plastics are harmful to watersheds and landfills Metalwërks uses only high-quality metal because: • Aluminum and stainless steel are highly valued materials and are widely recycled – no scrap goes into waste streams or landfills • The metals we use contain a high percentage of recycled contentAluminum Plate • 3003-H14 aluminum alloy-temper • Thickness: 0.125” (3.18mm) standard, 0.188” (4.78mm), 0.25” (6.35mm) options – consult with Metalwërks for additional options. • Finishes: Kynar® or architectural TGIC Polyester powder coating Stainless Steel • T304 or T316 for enhanced corrosion resistance • Thickness: 14 gauge (0.078”, 1.98mm) standard, 11 gauge (0.125”, 3.18mm), 12 gauge (0.109”, 2.78mm), 16 gauge (0.063”, 1.60mm) options • Finishes: #4, #6, #8 and non-directional satin in smooth or custom embossed patterns METAL SUBSTRATE AND FINISH OPTIONS PERFORATED OPTIONS/PATTERNS • Subject to material selections, conventional round, oblong, or square holes • Custom tool patterns and random spacing to match graphic designs • Available with non-perforated borders WIRE MESH OPTIONS • Custom and standard aluminum or stainless steel weave patterns • Opening areas: opaque to 80% open – standard 1”, 1.5”, 2” square options • Mounting methods with integrated mullions: Inset or Outset • Finishes: Kynar®, anodized aluminum, or architectural TGIC Polyester powder coating EXTRUDED OPTIONS Tubular Aluminum • Square standard sizes: 1” x 1” up to 6” x 6” • Rectangular standard sizes: 1” x 2” up to 2” x 8” – customizable up to 12” deep • Round sizes: 1” - 6” diameter • Custom profiles & sizes: Available in lot sizes of 1,000 ft 2 minimum • Custom airfoil, trapezoid, or tapered styles FORMED OPTIONS Aluminum Plate • 3003-H14 aluminum alloy-temper • Thickness: 0.125” (3.18 mm) standard, 0.188” (4.78 mm), 0.25” (6.35 mm) options – consult with Metalwërks for additional options. • Finishes: Kynar® or architectural TGIC Polyester powder coating FLAT PLATE OPTIONS Aluminum • Thickness: 0.125” - 1” (dependent upon gauge and geometry)200 Gale Lane Kennett Square, PA 19348 metalwerksusa.com 800-321-7816Next >