	Rainscreen Wall Systems	Barrier Wall Systems
Sculpted 3D* Minimal	Sculpted 3D* Ribbon	Sculpted 3D* Parametric	Arcwall Standard	Arcwall Advanced	Arcwall Spline Shiplap	Econowall	Omniplate 1500	Omniplate 2510
Performance	Drained and Back-Ventillated Rainscreen	✔	✔	✔	✔	✔	✔	✔	×	×
AMMA Pressure- Equalized Rainscreen	×	×	×	×	✔	×	×	×	×
Dry-Sealed Barrier Wall	×	×	×	×	×	×	×	×	✔
Wet-Sealed Barrier Wall	×	×	×	×	×	×	×	✔	×
Materials	Coated Aluminum	✔	✔	✔	✔	✔	✔	✔	✔	✔
Stainless Steel	✔	✔	✔	✔	✔	✔	✔	✔	✔
Zinc	✔	✔	✔	×	×	×	✔	×	×
Panel Forms	Flat	×	×	×	✔	✔	✔	✔	✔	✔
Curved	×	×	×	✔	✔	✔	×	✔	✔
3D	✔	✔	✔	✔	✔	×	✔	✔	×
Panel Returns	Formed	✔	✔	✔	✔	✔	×	✔	✔	×
Flat	×	×	×	×	×	✔	×	×	✔
Back-Scored	✔	✔	✔	✔	✔	×	×	✔	×
Panel Dimensions (inches)	Length	24-160"	48-160"	24-160"	12-160"	12-160"	12-240"	12-160"	12-160"	12-240"
Width	24-66"	24-48"	24-50"	12-65"	12-65"	12-72"	6-36"	12-65"	12-72"
Depth	Varies	Varies	Varies	1.75"	3.75"	2", 2.25", 2.75"	1.5"	1.75"	2.25"
Panel Orientation	Horizontal	✔	✔	✔	✔	✔	✔	✔	✔	✔
Vertical	✔	×	✔	✔	×	✔	✔	✔	×

Download Related Resources

Column and Beam Cladding

Metalwërks^® Column and Beam Cladding is engineered to provide expanded design flexibility.

Beyond typical cylindrical or square tubular enclosures, Metalwërks Column and Beam Cladding takes on virtually any geometrical form as it is manufactured from solid metal plate.

Perfect for enclosing any vertical, sloped, or horizontal structural member – concrete, structural steel, and stud backup – Metalwërks Column and Beam Cladding panels beautifully integrate with Metalwërks plate wall systems.

Features and Benefits of Column and Beam Cladding

Integrate with Metalwërks plate wall systems or stand-alone applications
Typically manufactured in solid 0.125” (3.18mm) or 0.188” (4.78mm) thick aluminum and 16-12 gauge stainless steel (smooth and textured)
More abuse resistant than gypsum- or fiberglass-based products or aluminum composite material
Can be custom formed to adapt to all types of geometric designs, including curves with
radii down to 6”
Non-Combustible: minimal smoke or fuel contribution
Avoids NFPA 285 complications by avoiding thermo-plastic cores
All panel systems are reinforced/stiffened to resist deflection limits
Vertical butt joints or open 0.625" reveals with recessed batten strip, or backer rod and sealant
Panels custom manufactured and not limited by minimum production runs
Metalwërks supplies engineered supports for the enclosure products
100% recyclable and manufactured from materials with high post-consumer/industrial content which can contribute to LEED credits
Virtually limitless palette of colors,
finishes, and textures
Aluminum: high performance finishes are post applied for the highest coverage and uniformity
Available in no-VOC powder coated finishes. Non-toxic and non-combustible.
Finish warranties up to 20 years (coated aluminum). Consult Metalwërks for limitations.

Uses of Column and Beam and Cladding

Enclosures for exposed columns, beams, or pilasters
Custom duct enclosures
Enhanced interior lobby aesthetics
Glazed or non-glazed curtain wall applications
Available with articulations, reveals and appliqués
High durability for high traffic areas and transit centers

Metalwerks Column and Beam Cladding 3d product image

Metalwerks Column and Beam Cladding vertical curved joint

Metalwerks Column and Beam Cladding vertical curved joint revealed

Metal Substrate and Finish Options

Aluminum Plate:

3003-H14 aluminum alloy-temper
Thickness: 0.125” (3.18mm) standard, 0.188” (4.78mm), 0.25” (6.35mm) options.
Consult with Metalwërks for additional options.
Finishes: Kynar® or architectural TGIC Polyester powder coating

Stainless Steel:

T304 or T316 for enhanced corrosion resistance
Thickness: 14 gauge (0.078”) (1.98mm) standard, 12 gauge (0.109”) (2.78mm), 16 gauge (0.063”) (1.60mm) options
Finishes: #4, #6, #8, and non-directional satin in smooth or custom embossed patterns

Zinc:

Consult with Metalwërks for options.

Zinc is a natural metal which has specific properties that will limit its use. It must be adequately drained, ventilated and weeped when used in exterior applications to prevent excessive corrosion. Please consult Metalwërks for the appropriate uses for your project design.

Panel Sizes

Profiles: Curved and Formed: 12" (305mm) to 66" (1,676mm)*

Lengths: Curved: 12" (305mm) to 192" (4,877mm)*
Formed: 12" (305mm) to 240" (6,096mm)*

Depth: Varies

* Maximum panel size depends upon plate material, gauge, finish, and geometry

Panel Weight Range
(dependent upon gauge and geometry)

Consult with Metalwërks for options.

Shapes or Profiles

Round or square

Elliptical & racetrack ovals

Conical or tapered

Non symmetrical articulations

Accessories

Support framing

Articulated capitals and bases

“Snug fit” spring loaded ceiling closures

Welded mitered sections, end caps, base reveals beam penetrations

Access doors

Sloped base, ceiling terminations

Curved base, ceiling terminations

Extruded or formed appliqués

Accent color reveals

Warranty

Material & Workmanship:1-year standard, with 2- or 5-year option

Finish Integrity: 10-year standard and up to 20-year for coated aluminum